CD92L SERIES

   ALUMINUM ELECTROLYTIC CAPACITORS

  • Load life of 2000 hours at 85oC

  • Long life, Higher ripple current than CD92 series, Extremely low impedance.

  

  • SPECIFICATIONS
Item Characteristics -
Operating Temperature Range(oC) -40~+85
Rated Voltage Range (V) 10~100
Nominal Capacitance Range (uA) 1000~220000
Capacitance Tolerance(20oC,120Hz) +/-20%
Leakage current(20oC)

 1<=0.006CV+4(uA) or 5mA(Whichever is smaller)(after 5 minutes)
 C: Nominal capacitance (uF) V: Rated voltage (V)

Dissipation Factor(20oC,120Hz)
Rated Voltage (V) 10 16 25 50 63 100
D.F. D=35 0.50 0.40 0.30 0.25 0.20 0.15
D=50 0.75 0.50 0.40 0.30 0.25 0.20
D=64 1.00 0.75 0.50 0.35 0.30 0.25
D=76 1.50 1.00 0.75 0.50 0.40 0.35

Load Life(85oC)
Time 2000 hours.
Leakage Current Not more than the initial specified value.
Capacitance Change Within +/-20% of the initial value.
Dissipation Factor Not more than 200% of the specified value
Shelf Life(85oC)      
Time 500 hours.
Leakage Current Not more than the initial specified value.
Capacitance Change Within +/-15% of the initial value.
Dissipation Factor Not more than 150% of the specified value

      After test: Rated voltage to be applied for 30 minutes, 24 to 48 hours before measurement.

 
  • DIMENSIONS                               MM 
  • MULTIPLIER FOR RIPPLE CURRENT
 

Lead spacing and diameter

D 35 50 64 76
F 12.7 21.8 28.2 31.4

Frequency coefficient

Freq.  (Hz) 50 100 400 1K 20K
Coefficient 0.7 1.0 1.08 1.10 1.15

  • STANDARD RATINGS
WV
10 16 25
Size Impedance Ripple  Size Impedance Ripple  Size Impedance Ripple 

Cap

(uF)

 -
DxL(mm) Z(mOhm)   (A) DxL(mm)  Z(mOhm) (A) DxL(mm)  Z(mOhm) (A)
1000 - - - - - - - - -
1500 - - - - - - - - -
2200 - - - - - - - - -
3300 - - - - - - - - -
4700 - - - - - - 35X60 23 5.2
6800 - - - - - - 35X60 21 5.2
10000 - - - 35X60 20 6 35X80 15 6.7
15000 35X60 20 6 35X80 14 7.5 35X100 11 9.7
22000 35X80 14 7.5 35X100 10 10 50X80 9.5 12.5
33000 35X100 10 10 50X80 9.5 13 50X100 8.0 18
47000 50X80 9.5 14 50X100 8.0 18 64X100 5.0 27
68000 50X100 8.0 18 64X100 5.0 28 64X100 5.0 27
100000 64X100 5.0 30 64X100 5.0 28 76X100 4.0 37
150000 64X100 5.0 30 76X100 4.0 37 - - -
220000 76X100 4.0 37 - - - - - -

WV
50 63 100
Size Impedance Ripple  Size Impedance Ripple  Size Impedance Ripple 

Cap

(uF)

 -
DxL(mm)  Z(mOhm) (A) DxL(mm)  Z(mOhm) (A) DxL(mm)  Z(mOhm) (A)
1000 - - - - - - 35X60 67 3.0
1500 - - - - - - 35X60 60 3.3
2200 - - - 35X60 33 3.7 35X80 42 4.6
3300 35X60 32 4.5 35X60 30 3.7 35X100 28 6.5
4700 35X60 33 4.5 35X80 21 5.2 50X80 25 7.4
6800 35X80 23 6 35X100 15 7.5 50X100 18 9.9
10000 35X100 17 7.5 50X80 14 9.5 64X100 11 15.0
15000 50X80 13 10 50X100 10.5 13.5 64X100 10 15.8
22000 50X100 10.5 15 64X100 6.0 21 76X100 8 20.5
33000 64X100 6.0 21 64X100 6.0 22 - - -
47000 64X100 6.0 22 76X100 4.5 30 - - -
68000 76X100 4.5 30 - - - - - -

     Ripple Current: 85 oC ,100Hz or 120Hz; Impedance: 20 oC, 20KHz.

     The specific capacitance and case size are available on request.

How to order   - part numbering system